China Factories Fabrication Tcd-20 Pneumatic Jack Hammer/Air Hammer

• Customization: Available
• Condition: New
• Customized: Customized
• Model NO.: TCD20
• Type: Air Hammer
• Percussive Frequency: 16Hz
• N.W: 10kg
• Length: 520mm
• Air Consumption: 1.1 M3;/Min
• Air Inlet: 3/4 P/T
• Piston Diameter: 42.85mm
• Bit Head Size: R26*80mm
• Working Style: Reciprocating Type
• Pneumatic Drill Range: Mining
• Degree of Automation: Semi-Automatic
• Screwdriver Startup Mode: Under Pressure
• Usage: Pneumatic Paving Breaker
• Air Wrench Type: Air Shovel
• Brand: Shenli
• Transport Package: Carton/Wooden Box
• Specification: 53*20*14CM
• Trademark: SHENLI
• Origin: Hebei
• HS Code: 8201300090
• Production Capacity: 10000 Sets/Month
• Package Size: 53.00cm * 20.00cm * 14.00cm
• Package Gross Weight: 13.000kg

Product Description

Product Description

TCD20 Air Pick driven by compressed As a small breaking tool. it features light weight easy operation. 

Product introduction:

The TCD-20 pneumatic pick is powered by compressed air using  technology Crushing tools, features: light weight, small size, large strike energy, high frequency, whole forging, not easy to damage, can work in all directions, suitable for narrow space operation, let you light The pine.

Adopted technology, the air picks with proven forging technology are durable, lightweight and good performance, and easy to operate. Mainly used for.

Breaking concrete, breaking permafrost, breaking the ice; road repair, planing pits, trenching; mining soft rock, coal mining, etc. Replacement attachments can be used for such as loading and unloading track pins and other construction work that requires impact is more flexible and lighter than similar products, suitable for all-round work, especially in small working spaces, upward or ascent. It is also very popular as an air shovel.

Function:

High durability and long life

Durable forging body, long service life.

Replaceable bushing prevents cylinder wear.

Simple to operate and maintain

The automatic push-up mechanism, smooth operation.

Lightweight, easy to operate.

Simple structure, few parts, easy maintenance.

Main parameters of air pick products

Parameter/name	tca-7	tcd-20	rb777	tpb-40	tpb-60	tpb-90
Piston diameter	35mm	42.85	57mm	44mm	57.15mm	66.67mm
Piston stroke	120mm	60mm	189mm	146mm	100mm	152mm
Percussive frequency	1250 B.P.M	2000 B.P.M	18.3 Hz	1050 B.P.M	1400 B.P.M	1400 B.P.M
N.W	7.2kg	10kg	37kg	18kg	30kg	42kg
Length	465MM	520MM	733MM	660MM	645MM	723MM
Air consumption	1.0m³/min	1.1 m³/min	0.63Mpa	1.6 m³/min	2.0 m³/min	2.2 m³/min
Tracheal diameter	19	19	19	19	19	19
bit head size	R26*80	R26*80	R32*152	R25*108	R32*152	R32*152

FAMOUS BRANDS

SOLD WORLDWIDE

IDEAL CRUSHING TOOLS

Application Scenario Testing

SHENLI

AIR PICK

TCD-20

TCD20 wind pick is a compressed air-powered crushing tool can effectively complete the crushing of reinforced concrete, rock, etc. Shenli machinery to create high-quality products

TCD20 crusher has large air inlet, high crushing cavity, high hardness, large block size, and less stone powder in the product.

There is a trigger switch below the press handle, push the trigger, press the handle, the crusher begins to work, the trigger greatly improves the product work safety factor

TCD-20 AIR PICK
Breaking tools

TCD20 air pick daily maintenance
1. The normal working air pressure of the air pick is 0.5MPa. During normal operation, add lubricating oil every 2h. When filling oil, first remove the air pipe joint, place the air pick at an angle, press the handle of the pick, and inject from the connecting pipe.

2. During the use of the air pick, disassemble it at least twice a week, clean it with clean kerosene, dry it, apply lubricating oil, and then assemble it. When parts are found to be worn and out of order, they should be replaced in time, and it is strictly forbidden to work with air picks.

3. When the accumulative use time of the air pick reaches more than 8h, the air pick should be cleaned.

4. When the air pick is idle for more than a week, oil the air pick for maintenance.

5. Polish the burr pick and drill in time.

TCD-20 AIR PICK
Details show 

Precautions:

1. Before using the air pick, lubricate the air pick with oil.2. When using the air picks, there should be no less than 3 spare air picks, and the continuous working time of each air pick should not exceed 2.5h.3. During operation, hold the handle of the pick and press it in the direction of the chisel so that the pick is strong against the socket.4. Select the trachea to ensure that the inside of the pipe is clean and clean and the trachea joint is firmly and reliably connected.5. During operation, do not insert all the picks and drills into broken objects to prevent air strikes.6. When the pickaxe is stuck in the titanium lump, do not shake the pickaxe violently to avoid damage to the body.7. During operation, choose the pick and drill reasonably. According to the hardness of the titanium lump, choose a different pick and drill. The harder the titanium lump, the shorter the pick and drill, and pay attention to check the heating of the shank to prevent the pick and drill from being stuck.8. When drilling the burrs, it should be handled in time, and the burrs should not be used for drilling operations.9. Air strikes are strictly prohibited.

TCD-20 AIR PICK
Details show Pneumatic Pick

The SHENLI TCD20 Pneumatic Air Pick, is a lightweight, high-performance handheld tool powered by compressed air. Weighing only 10kg with a total length of 520mm, it features a 42.85mm piston diameter, 60mm stroke, and 2000 BPM percussive frequency, delivering ≥30J impact energy. Built with durable alloy steel forgings and an integral oiler for continuous lubrication, this air pick ensures reliable operation in harsh conditions. Ideal for concrete breaking, frozen earth demolition, coal mining, soft rock excavation, and road repair, it auto-stops once material is fractured for safety.

Packaging Image

FAQ

1. : Are you factory or trade company?
A: We are factory. And we have ourselves trading company.
2: Warranty terms of your machine?
A: 3 months for the core components and technical support according to your needs.
3: Will you provide some spare parts of the machines?
A: Yes, we have most of the spare parts in stock.
4: Which payment term can you accept?
A: 30% T/T Ain advanced, 70% T/T before the delivery.
5: Can you accept OEM orders?
A: Yes, we have high specialized and rich experienced team, OEM orders are highly welcome.
6: Which trade term can you accept?
A: FOB, CIF, CFR, EXW, CPT, etc.