Jack Hammer Hand Held Hammer Pneumatic Breaker G10 Air Pick Pneumatic

Product Description

Product Description

G10 Air Pick driven by compressed As a small breaking tool. it features light weight easy operation. 

Product introduction:

The G10 pneumatic pick is powered by compressed air using  technology Crushing tools, features: light weight, small size, large strike energy, high frequency, whole forging, not easy to damage, can work in all directions, suitable for narrow space operation, let you light The pine.

Adopted technology, the air picks with proven forging technology are durable, lightweight and good performance, and easy to operate. Mainly used for.

Breaking concrete, breaking permafrost, breaking the ice; road repair, planing pits, trenching; mining soft rock, coal mining, etc. Replacement attachments can be used for such as loading and unloading track pins and other construction work that requires impact is more flexible and lighter than similar products, suitable for all-round work, especially in small working spaces, upward or ascent. It is also very popular as an air shovel.

Function:

High durability and long life

Durable forging body, long service life.

Replaceable bushing prevents cylinder wear.

Simple to operate and maintain

The automatic push-up mechanism, smooth operation.

Lightweight, easy to operate.

Simple structure, few parts, easy maintenance.

Main parameters of air pick products

Percussive frequency	≥43 J
Impact frequency	16 Hz
Air Consumption	26 L/S
Bit Fixation	Spring clip
Total length	575 MM
Net Weight	10.5 KG
Pickaxe	300/350/400

FAMOUS BRANDS

SOLD WORLDWIDE

IDEAL CRUSHING TOOLS

Application Scenario Testing

SHENLI

AIR PICK

TCD-20

G10 wind pick is a compressed air-powered crushing tool can effectively complete the crushing of reinforced concrete, rock, etc. Shenli machinery to create high-quality products

G10 crusher has large air inlet, high crushing cavity, high hardness, large block size, and less stone powder in the product.

There is a trigger switch below the press handle, push the trigger, press the handle, the crusher begins to work, the trigger greatly improves the product work safety factor

G10 AIR PICK
Breaking tools

G10/G7 air pick daily maintenance
1. The normal working air pressure of the air pick is 0.5MPa. During normal operation, add lubricating oil every 2h. When filling oil, first remove the air pipe joint, place the air pick at an angle, press the handle of the pick, and inject from the connecting pipe.

2. During the use of the air pick, disassemble it at least twice a week, clean it with clean kerosene, dry it, apply lubricating oil, and then assemble it. When parts are found to be worn and out of order, they should be replaced in time, and it is strictly forbidden to work with air picks.

3. When the accumulative use time of the air pick reaches more than 8h, the air pick should be cleaned.

4. When the air pick is idle for more than a week, oil the air pick for maintenance.

5. Polish the burr pick and drill in time.

G10 AIR PICK
Details show 

1. Before using the air pick, lubricate the air pick with oil.

2. When using the air picks, there should be no less than 3 spare air picks, and the continuous working time of each air pick should not exceed 2.5h.

3. During operation, hold the handle of the pick and press it in the direction of the chisel so that the pick is strong against the socket.

4. Select the trachea to ensure that the inside of the pipe is clean and clean and the trachea joint is firmly and reliably connected.

5. During operation, do not insert all the picks and drills into broken objects to prevent air strikes.

6. When the pickaxe is stuck in the titanium lump, do not shake the pickaxe violently to avoid damage to the body.

7. During operation, choose the pick and drill reasonably. According to the hardness of the titanium lump, choose a different pick and drill. The harder the titanium lump, the shorter the pick and drill, and pay attention to check the heating of the shank to prevent the pick and drill from being stuck.

8. When drilling the burrs, it should be handled in time, and the burrs should not be used for drilling operations.

9. Air strikes are strictly prohibited.

G10 AIR PICK
Details show Pneumatic Pick

The G10 air pick uses compressed air as the power tool, and the compressed air is distributed in two sections of the cylinder by the tubular distribution diverter valve in turn, so that the hammer body makes repeated impacting movements and impacts the end of the pick, causing the pick to strike into the rock or ore layer, causing it to split into pieces.

Breaking concrete, breaking permafrost, breaking the ice; road repair, planing pits, trenching; mining soft rock, coal mining, etc. Replacement attachments can be used for such as loading and unloading track pins and other construction work that requires impact is more flexible and lighter than similar products, suitable for all-round work, especially in small working spaces, upward or ascent. It is also very popular as an air shovel.

Packaging Image

FAQ

1. : Are you factory or trade company?
A: We are factory. And we have ourselves trading company.
2: Warranty terms of your machine?
A: 3 months for the core components and technical support according to your needs.
3: Will you provide some spare parts of the machines?
A: Yes, we have most of the spare parts in stock.
4: Which payment term can you accept?
A: 30% T/T Ain advanced, 70% T/T before the delivery.
5: Can you accept OEM orders?
A: Yes, we have high specialized and rich experienced team, OEM orders are highly welcome.
6: Which trade term can you accept?
A: FOB, CIF, CFR, EXW, CPT, etc.