Yt28 Drilling Rock with Hammer Drill Gas Powered Rock Drill for Sale

Product Description

Product Features And Technical Specifications

Model:	Yt28
N.W.:	26kg
Length:	661mm
Bit Head Size:	R22×108mm
Air Consumption:	≤81 L/S
Percussive Frequency:	≥37Hz
Impact Energy:	≥75.5 J
Boreholes Diameter:	34-45mm
Piston Diameter:	80mm
Piston Stroke:	60mm
Working Air Pressure:	0.63 Mpa
Working Water Pressure:	0.3 Mpa
Drilled Holes Depth:	2m-5m

Technical Specifications

Features

Core Features:

Strong adaptability: suitable for medium hard or hard (f=8-18) rocks, can drill horizontal, inclined, and upward boreholes, with an effective drilling depth of about 5 meters.
Efficient and energy-saving: low gas consumption, can be operated with a small air compressor; The air leg provides stable propulsion and fast footage speed.
Wet dust removal: an air-water linkage mechanism that evenly supplies water during rock drilling and discharges it in the form of rock powder slurry, improving the working environment.
Easy to operate: centralized control handle, quick retraction of air leg, simple maintenance, suitable for on-site mobile operations.
Reliable structure: It can be matched with FT-160BC air legs and can also be installed on trolleys to adapt to different working conditions.

Precautions for use:
Before homework:
Blow out impurities from the air and water pipes to prevent them from entering the machine and causing wear and tear.
Fill the oil injector with L-AN46 mechanical oil and adjust it to about 1 liter/hour. It is strictly prohibited to operate without lubrication.
Close the pressure regulating valve before ventilation to avoid injury caused by sudden extension of the air leg; Low voltage test run for 5 minutes, confirm no abnormalities before normal operation.
In the homework:
Strictly follow the principle of boiling water first and then turning on the air. At the end, turn off the water first and then turn off the air, and run for a short period of time to drain the accumulated water.
Keep the water pressure 0.1-0.15MPa lower than the air pressure to prevent water from entering the body and damaging lubrication.
Slowly operate when opening eyes, stabilize eye position, and then gradually increase speed; Personnel should stand at the side and rear, and it is strictly prohibited to face their eyes directly to prevent injury caused by broken drill rods.
Check if the Feng Shui connection is secure and avoid detachment; Adjust the air and water volume according to the rock type to avoid excessive pushing that may cause hole displacement.
After homework:
Clean the body and air leg debris, maintain regularly, inspect at least once a week, and replace damaged parts in a timely manner.
Long term storage requires disassembly, washing, oiling, and placement in a cool and dry place to avoid rusting.

Railway, tunnel, highway, metallurgy, coal mine, water conservancy and hydropower construction projects.

Product Decomposition Diagram

Some of the vulnerable parts in the picture can be given as additional 2-4 sets of matching parts. Specific part requirements can be negotiated with sales for replacement and gift. If there are no notes, some parts will be randomly given as gifts

Rock Drills Before Use

Precautions For Use

1,Check the integrity and rotation of all parts (including rock drill, bracket, or rock drill cart) before drilling, fill necessary lubricant, and check whether the wind and waterways are smooth and whether the connection joints are firm.

2,Knock on the roof near the working face, i.e. check whether there are live rocks and loose rocks on the roof and second gang near the working face, and make necessary treatment.

3, the working surface of the flat shell hole location, is to be pounded flat in advance before allowing rock drilling, to prevent slippage or shell hole displacement.

4. It is strictly forbidden to drill dry eyes, and we should insist on wet rock drilling, turn on the water first and then the wind when operating, and turn off the wind and then the water when stopping drilling. When opening the hole, run at low speed first, and then drill at full speed after drilling to a certain depth.

5,No gloves are allowed to be worn by the drillers when drilling.

6,When using the air leg to drill the hole, pay attention to the standing posture and position, never rely on the body to pressurize, let alone stand in front of the rock drill under the work brazing rod, to prevent injury from broken brazing.

7,If abnormal sound and abnormal water discharge are found in rock drilling, stop the machine for inspection and find out the reason and eliminate it before continuing to drill.

8,When withdrawing from the rock drill or replacing the brazing rod, the rock drill can run slowly and pay attention to the position of the rock drill braze.

Application Image

Usage Scenarios

SHENLI

YT28 air-legged rock drill is a heavy-duty air-legged rock drill with high efficiency low consumption, especially suitable for use in the construction of railroads, highways, hydropower, etc.

YT28

It is also a replacement product for gold, coal and other mining roadway ingress and various rock drilling operations.

Air Leg Rock Drill

It is suitable for drilling and blasting under various of rocks and any direction angles.Blast hole dia is 34-42mm, drill hole depth is 5m.

Packaging Image

FAQ

1 : Are you factory or trade company?
A: We are factory. And we have ourselves trading company.

2: Warranty terms of your machine?
A: 3 months for the core components and technical support according to your needs.

3: Will you provide some spare parts of the machines?
A: Yes, we have most of the spare parts in stock.

4: Which payment term can you accept?
A: 30% T/T in advanced, 70% T/T before the delivery.

5: Can you accept OEM orders?
A: Yes, we have high specialized and rich experienced team, OEM orders are highly welcome.

6: Which trade term can you accept?
A: FOB, CIF, EXW, etc.